SKU: 72270472981

Maton Guitars ER90 Traditional - 17181

$1426.05 $1584.50
Save 10%
No.2 Bestseller on ugma.ge >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Maton Guitars ER90 Traditional - 17181Maton ER90 Traditional 17181 The ER90 Traditional is the outcome of combining three inspirational sources, the ER90C, the 75th Anniversary Traditional model and the Custom Shop CS Classic. The Traditional and CS Classic model designs originated in the Custom Shop. Their body shape is more akin to our OM Orchestra Model design. Here's the description direct from the Maton workshop: "It incorporates the bracing and design elements of the 75th

Maton ER90 Traditional - 17181

The ER90 Traditional is the outcome of combining three inspirational sources, the ER90C, the 75th Anniversary Traditional model and the Custom Shop CS Classic.

The Traditional and CS Classic model designs originated in the Custom Shop. Their body shape is more akin to our OM Orchestra Model design. Here's the description direct from the Maton workshop:

"It incorporates the bracing and design elements of the 75th Traditional, along with the rosewood back and sides and satin finish of the ER90C and the thinner body depth of the CS Classic.

The result is a small-bodied guitar with a full tonal response that rings like a bell. There is no lack of bass due to the thinner body depth (the body is 10mm thinner than the 75th Anniversary body) as the depth is offset by the incredible rich bass produced by the rosewood back and sides. The reduced body depth also provides a little more focus in front of the guitar which will make it a brilliant recording instrument.

Visually, the ER90 Traditional has borrowed its look from its older brother the ER90C, which includes multi-banded inner binding, white outer binding, a mahogany neck, streaky ebony fingerboard and bridge, and a streaky ebony headstock veneer. The mahogany neck provides tone and stability and the ebony board and bridge add a little top-end brightness to complement the rich bass of the rosewood back and sides.

The top bracing is fully scalloped and includes the laser cut bridge plate originally developed for the 75th Anniversary model, designed to increase strength without adding weight.

This is a wonderful guitar that will suit all styles of playing, from light fingerstyle to full-blown strumming, and of course, it is fitted with Maton's brilliant AP5 Pro pickup system which will make the ER90 Traditional absolutely unbeatable on stage..."

The Maton AP5-Pro Electronics

In its 5th generation, the AP5 Pro features an internal Microphone and 6-Piezo bridge input, with controls that allow for blending of both microphone and piezo levels prior to sending the actively combined signals through the well engineered pre-amp.

The highly selective cardioid microphone system allows for much greater microphone level before feedback in live environments. This upgraded AP5-Pro microphone is direct mounted to the pre-amp casing with an adjustable arm, which permits easy final tweaking of microphone position to suit the individual artist's playing style.

Using the ‘Sweep-able Mid’ controls. Mid-range is sweep-able from 600Hz to 2.4kHz and can be cut or boosted within this range. As a general rule we start out with all settings ‘flat’ then alter them to achieve the desired tone & presence based on the venue or recording environment. For example, an open, natural sound can be achieved by setting the frequency control at 1.4khz and the boost/cut control at 5db. Alternatively, for a ‘thick’ lead sound boost your Mid's by 5db and set the frequency dial at 1.7kh.

Specifications:

  • Model: ER90 Traditional
  • Body Shape: Traditional
  • Soundboard: "AA" Sitka Spruce
  • Back & Sides: Indian Rosewood
  • Nut Width: 44.1mm (1.736" - 1 47/64")
  • Scale: 64.77cm (25.5")
  • Bracing: Maton Scalloped & Forward Shifted X Brace
  • Inlays: 6mm Pearl Dots
  • Inner Binding: Triple Pinstripe Violin Purfling
  • Rosette: Herringbone Sound Hole Rosette
  • Neck: Mahogany
  • Neck Profile: Soft "C" Shape
  • Nut Width: 44.1mm (1.736" - 1 47/64")
  • Fretboard: Streaky Ebony
  • Fingerboard Radius: 304.8mm (12")
  • Fretwire: Jescar FW43080
  • Nut Material: Bone
  • Saddle Material: Bone
  • Bridge: Streaky Ebony
  • Tuners: Gold Grover Rotomatic
  • Body Binding: White
  • Pick Guard: Tortoise
  • Headstock Overlay: Streaky Ebony
  • Headstock Inlay: Maton Logo
  • Finish: Satin Nitrocellulose Lacquer Body & Neck
  • Pickup(s): AP5 Pro
  • Case: Hardshell Case with Maton Logo
  • Serial Number: 1403
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 72270472981

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 564 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
RogerK
Omaha, US
★★★★★ 5
Excellent mouse and more!
Size: One Size
The Logitech M510 wireless mouse is a very comfortable and smoothly performing mouse. It is a full size mouse that nicely fills up the palm of the hand. The weight of the mouse is "just right". The mouse body is symmetrical so that will be equally comfortable for left or right handed people. The mouse movement and scroll wheel work perfectly smoothly with no jump or jitter. The mouse optical performance is very robust on poor surfaces. It works equally well on a mousepad, a bare table, on a pants leg, back of a book, even the palm of the hand. It tracks perfectly on almost any surface (which many other mouse brands have trouble with). These mice use the Logitech "Unifying" USB mini receiver which can support up to six Logitech devices by itself. If you have a Logitech mouse, keyboard, trackball, etc... they can all operate from the same receiver (saves using up USB ports). Be aware that the unifying receiver ONLY works with Logitech products and that it is NOT Bluetooth or Wi-Fi. Logitech products can be "paired" with the unifying receiver in Windows and MAC (of course) and also in Linux by using the software package called "solaar" (free, open source). The mouse comes pre-paired to the receiver, so it works "out of the box". If you want to add (up to 5 more devices), you have to pair them yourself. The battery life is awesome. Because I hate leaking batteries, I always use AA lithium cells for everything (including the mouse). My first old Logitech MS-510 mouse that I purchased over three years ago is still working fine on the FIRST batteries that I installed in it (two AA lithium). Since I use it on my desktop the mouse power switch is always left on. It must consume practically no power when not being used. If you use the mouse with a laptop or need to move it from computer to computer, the little unifying receiver can be stored inside the mouse (in a little USB sized slot next to the batteries) to avoid losing it. What follows is some technical information that you can skip if you don't care. Construction: This mouse is very nicely engineered and can be completely disassembled by removing two little screws inside the battery compartment. No screws hide under the teflon slider pads, so those don't get damaged if you take the mouse apart. Every component then can be removed simply by sliding or snapping it out. Why take it apart? See next. My personal feeling is that the left and right mouse buttons are too light (i.e. press too easily). The buttons are no lighter than other mice, I just prefer them a bit tighter. To change this, I replace the two little microswitches with Omron Series D2F-01 parts that have a 150 gf actuation force. It takes about twice the pressure to click these switches as compared to the originals. To replace them is super simple: Just unsolder the originals and solder the new ones in place. If you forget which way they go in, the orientation is printed on the PC board. The side "scroll" buttons already use heavier pressure microswitches, so I don't change these. The "middle button" (pressing the scroll wheel) and the left/right scroll switches (rock the scroll wheel left or right) are a different type of switch that also do not need changing. If you disassemble the mouse, be aware that the little plastic slider for the power switch will be free to fall out when the mouse PC board is removed. If you don't know this, it's possible for the slider to silently fall out, never to be seen again. I won't tell you HOW to unsolder and resolder the button microswitches, because if you don't know how, you shouldn't be doing jt in the first place (or get an electronics-knowledgable friend to help). And, of course opening and modifying the mouse will void the warranty! I will give you one important hint: Because the mouse was assembled using RoHS compliant lead free solder, the microswitch solder joints should first be RE-SOLDERED with leaded solder before sucking or wicking the joints clean. This is done to "alloy" the high temperature lead free solder into more manageable leaded solder to avoid burning/ruining the (single sided) PC board. Good luck! This mouse (hacked or not) gets 5 stars and both thumbs up. It works flawlessly, it's comfortable, battery life is amazing and the price is good (even better when it's sometimes on sale). Grab one!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 27, 2020
S
Verified Purchase
SMH
Houston, US
★★★★★ 5
Excellent mouse, good size, enough buttons
Size: One Size
Easy to setup. Fit hand well. Has enough buttons to do everything I want. Good price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
O
Verified Purchase
oconnorz
Lexington, US
★★★★★ 5
10/10 work mouse
Size: One Size
Lasts forever. Been my work mouse for years. Batteries last forever in it. Cheap enough to keep a spare in my laptop bag for when I need to travel for work. Not a gaming mouse, but a serviceable work mouse. But not tiny like a "travel mouse" so it isn't uncomfortable to use. A man can use one without his hand cramping up.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
S
Verified Purchase
shannda
Chelsea, US
★★★★★ 5
Comfortable Seating
Color: Black, Style: Classic
I honestly didn’t expect this chair to be this comfortable, but it has exceeded my expectations in every way. I sit at my desk for long hours every day, and the adjustable air-pump lumbar support has been a total game changer. I love that I can fine-tune the firmness depending on how my back feels that day. My lower back pain has noticeably improved since switching to this chair.The seat is wide, thick, and very supportive without feeling stiff, which makes long work sessions much more comfortable. The armrests are another big plus—they adjust in so many directions that I can always find the perfect position for typing, reading, or relaxing. The chair feels extremely sturdy and well built, and it gives me confidence knowing it supports higher weight without wobbling.Assembly was straightforward and took about 20 minutes. Overall, this chair feels premium, comfortable, and thoughtfully designed. I would absolutely recommend it to anyone looking for a reliable, all-day office chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026
C
Verified Purchase
Cynthy
Draper, US
★★★★★ 5
Nice chair, w/ good cust support
Color: Black, Style: Classic
I apologize for length, but if I am doing a review for other people I assume you want to have as much info as possible to make a decision. I feel this chair is for tall/fat/both so will review it as such. At 6’4” @ 350lbs I fit into both, but reviewing based upon my body, yours is different so adjust according. TLDR – Would buy again, cavernous comfy chair with excellent customer support. Only personal dings against chair are the back could be taller, but added back due to support. Parts + Fit/Finish + Assembly: The parts have some heft and feel solid as expected for a chair designed for heavy people. Material and stitching look proper and I see no flaws. My box was beat to hell and ripped opened at one point. Packing material took the hit and did its job as the items were unaffected. The gas cylinder for the chair was missing and assume lost during shipping. (see customer service). Assembly was standard office chair fare with simple and clear instructions. Wheels / Height / Controls: I normally wouldn’t think of mentioning wheels, but it’s different than expected. They are good, maybe too good. A slight kick to push you back on wood floors sends you flying. The height adjustment for me is good/standard. At full height my feet are flat on the floor and where I would have the chair even if it went higher. My wife (5’6”) at that height is about 2.5 inches above the floor. Taller people than myself may wish for more height. Chair controls are standard fare and operate smoothly Seat: It’s large and with the arms is there is nothing even close to your hip/legs. I can put my fist on my hips and my arms barely touch the chair arms. This is why you are thinking of this chair, and for that you will not be disappointed. The seat is not pillow soft and IMHO a little firmer than I liked at first, but after a few days got broken in or I adjusted. I am a programmer + gamer so spend a lot of time in the chair for hours on end. Comfortable and no complaints at all. Seat depth for me is ~1” from my knee and good with roughly 20.5” usable butt/thigh length. That should be fine for big/tall but may be a bit much for big/short. Measure your current chair and decide from there. Back: The back lets the chair down a bit for me, the big/tall user, as the target seems to be big/short users. The back ends just below my shoulder-line. That obviously means no leaning my head back and the headrest is squarely on my shoulder blades. Not uncomfortable, but I’d prefer a taller back. For me personally I’d like it to be extended 4”, but that would likely be an issue for shorter users. I feel if the manufacturer increased the back by 2 inches it would be an ideal compromise for all users. The chair has an inflatable lumbar support, which I did not use as I personally find those uncomfortable. Also note the chair is designed for a more proper posture with a 90deg back and not a more relaxed 100-110deg. Neither pro/con as personal preference. Arms: The design of the arms being supported by rear only as mentioned earlier allow for an abundance of hip/thigh space. This is an excellent ergonomic design with a potential caveat. More stress will be placed upon the connection/joint. The joint for this chair is just shy of 4” so seems beefy but only time will tell if it holds up to the lateral force of leaning on it while reading. My chairs tend to last 5-7 years, due to the right arm feeling wobbly or the chair leaning to the right. The arm adjustments provide a nice front/back of ~3”, from touching chair back to 3” gap between chair/armrest. The height is similar and also moves the armrest forward about another 2”. At full forward/up the armrest are higher than I like so should easily accommodate taller users. Customer Service My chair was missing a part that I suspect was lost during shipping due to box condition. I contacted them Sun (7/20/2025 @ 1201). At 2228 that night I received a response that they acknowledged the issue and gave a tracking order for the missing part. The part arrived Mon 7/28 and gave a few days to test it out for review Fri (8/1). Obviously you don’t want an issue, but if an issue arises how a company handles it tells you a lot IMHO on how they feel about their product. I am very pleased with their handling of the matter.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025

recommand products

Chad Smith Red Hot Chili Peppers Signed Autograph 10” Drumhead RHCP Beckett COA
199.99
EBC 09-11 Audi A6 Quattro 3.0 Supercharged Redstuff Rear Brake Pads
141.72
EBC 04-07 Porsche Cayenne 3.2 Redstuff Rear Brake Pads
154.99
Fiber Optic Tubing w/ Ground Wire, 7' Tubing, 10' Bundle, Gray
113.97
ISO-C 6-Pin Deluxe 3 HP Illumination System, 7', LT Sand
189.47